About this film
Bopp Metallized Capacitor Film is a metallized BOPP capacitor film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. Each product has its own special,natural,outstanding soul! One company (anhui eastern communication) offer tear tape products to the world market sufficiently. Available in 3-7μm thickness.
Key Features
- High clarity
- Low dielectric loss
- High breakdown strength
- Excellent self-healing performance
- Uniform metallization
Applications
- Film capacitors
- Power electronics
- Motor run capacitors
- Lighting ballasts
Product Details
Each product has its own special,natural,outstanding soul!
One company (anhui eastern communication) offer tear tape products to the world market sufficiently.
Great largest market bone great largest enterprises, and great demand oftear tape all over the world pushs our company (anhui eastern communication) growing largest scales.
BOPP Metallized Capacitor Film (silver)
Metallized BOPP Capacitor Film (silver film) have two items :
1. Zn/Al Metallized BOPP Capacitor Film (silver film)
2. Al Metallized BOPP Capacitor Film (silver film)
Metallized BOPP Capacitor Film were also called silver pp Capacitor film,
CBB capacitor metallized film
Type:Jumbo rolls and small finished rolls :reinforced edge ( of Aluminum/Zinc film ) are : 1.5,2.0,2.5 MM
The standard thickness range including: 3,4,5,6,7,8,9,10,12 microns .
The standard tolerance thickness: +/-0.2 Um .
The standard width range including: 30,40,50,60,70,80,90,100,120,130 MM
The standard tolerance width: +/-5 MM.
The inner core : 3" (76MM)
The outer core: 150-350 MM .
Features: zn/al BOPP capacitor film
1) single side corona treated for the Zn or Zn/Al metallized .
Here, you will get the real business for cigarette tear tape, and from here, your tear tape business gets two wings, your tear tape business will be booming beyond your image from now on, and not able to stop but expanding continuously in future.
Just a choice of us, you get all !
Choose us, this is : your buyer's choose you too.
Choose us, this is: you chosse yourself and profit money choose you.
Who will win and laugh in tear tape business lines at last? no doubt, it is you who choose us!
As a professional packaging film manufacturer in China, AEC GROUP supplies Bopp Metallized Capacitor Film for film capacitors. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.
Key points
- High clarity
Technical data
1. BOPP capacitor film -safety
1.) M-PP for metallized -film capacitors applications .
2.) S-PP for foil-film capacitors applications .
The standard thickness range including: 3 ,4,5,6,7,8,9,10,12 microns .
The standard tolerance thickness: +/-0.2 Um .
The width range including: can slit any width(MM )upon the requirement.
The inner core : 3" (76MM) The outer core: 150-350 MM .
2.BOPP capacitor film-rough(BOPP rough clear capacitor film)
1.) R-PP : one side of rough capacitor film (power capacitor use).
2.) RR-PP: two sides of rough capacitor film
3. BOPP capacitor film silver metallized Zn/Al
4. BOPP capacitor film silver metallized Al
5. BOPP capacitor film silver metallized Al or Zn/Al safety and anti-explosion (explosion-proof)
技术参数与物理性能表 (Technical Characteristics)
| Properties (特性项目) | Unit (单位) | Typical Values (典型值) | Test Conditions (测试条件) |
| Tensile strength (拉伸强度) - MD | MPa | 140 | Stretching speed: 100%/min @ 23°C, 50% r.h. |
| Tensile strength (拉伸强度) - TD | MPa | 250 | Stretching speed: 100%/min @ 23°C, 50% r.h. |
| Elongation at break (断裂伸长率) - MD | % | 100 | — |
| Elongation at break (断裂伸长率) - TD | % | 50 | — |
| Thermal shrinkage (热收缩率) - MD | % | 3.5 | 15 min @ 120°C (或依通常条件) |
| Thermal shrinkage (热收缩率) - TD | % | 1.0 | 15 min @ 120°C (或依通常条件) |
| Wetting tension (润湿张力) | mN/m | 38 | Corona-treated Side (电晕处理面) |
| Surface roughness (表面粗糙度) | μm | 0.1 | 23°C |
| BDV X (击穿电压) | V/μm | 550 | at 23°C air |
| Relative permittivity (相对介电常数) | — | 2.2 | 50Hz or 1kHz @ 23°C |
| Volume resistivity (体积电阻率) | $\Omega \cdot m$ | $5.0 \times 10^{15}$ | 23°C |
| Dielectric dissipation factor ($\tan\delta$) | — | $2 \times 10^{-4}$ | 50Hz or 1kHz @ 23°C |
Typical values — tolerances are confirmed in the quotation.
Supply & export
Produced and converted within the AEC GROUP, BOPP Metallized Capacitor Film is supplied in jumbo rolls, slit rolls or sheets to your width and core size, with export packing, certificate of origin and the documents your importer needs. Tell us the application, thickness and annual volume and we will confirm the grade, MOQ and lead time.
中文简介与参数 / Chinese information
Product description
BOPP镀金属电容器薄膜(银膜),分两类:1. 锌/铝(Zn/Al)镀金属BOPP电容器薄膜;2. 铝(Al)镀金属BOPP电容器薄膜,也称银PP电容膜、CBB电容镀金属膜。规格:提供大卷与小成品卷;加强边(铝/锌膜)1.5、2.0、2.5毫米;标准厚度3—12微米,公差±0.2微米;标准宽度30—130毫米,公差±5毫米;纸芯内径3英寸(76毫米),外径150—350毫米。特点:锌或锌/铝镀金属面单面电晕处理,适用于各类电容器制造。
Technical data
BOPP 电容器膜(透明及镀银)(3–12/15/18 μm)1. BOPP 安全型电容器膜
1)M-PP 用于金属化膜电容器。
2)S-PP 用于箔式膜电容器。
标准厚度范围:3、4、5、6、7、8、9、10、12 μm。
标准厚度公差:±0.2 μm。
幅宽范围:可按要求分切成任意幅宽(mm)。
纸芯内径:3"(76 mm);外径:150–350 mm。
2. BOPP 粗糙型电容器膜(BOPP 粗糙透明电容器膜)
1)R-PP:单面粗糙电容器膜(电力电容器用)。
2)RR-PP:双面粗糙电容器膜
3. BOPP 镀银(锌铝)电容器膜
4. BOPP 镀银(铝)电容器膜
5.BOPP 镀银(铝)或锌铝安全防爆(防爆型)
技术参数与物理性能表
| 性能项目 | 单位 | 典型值 | 测试条件 |
| 拉伸强度(纵向(MD)) | MPa | 140 | 拉伸速度:100%/min,23 °C、50% RH |
| 拉伸强度(横向(TD)) | MPa | 250 | 拉伸速度:100%/min,23 °C、50% RH |
| 断裂伸长率(纵向(MD)) | % | 100 | — |
| 断裂伸长率(横向(TD)) | % | 50 | — |
| 热收缩率(纵向(MD)) | % | 3.5 | 120 °C × 15 min(或依通常条件) |
| 热收缩率(横向(TD)) | % | 1.0 | 120 °C × 15 min(或依通常条件) |
| 润湿张力 | mN/m | 38 | 电晕处理面 |
| 表面粗糙度 | μm | 0.1 | 23°C |
| 击穿电压 | V/μm | 550 | 23 °C 空气中 |
| 相对介电常数 | — | 2.2 | 50 Hz 或 1 kHz,23 °C |
| 体积电阻率 | Ω · m | 5.0 × 10^{15} | 23°C |
| 介质损耗角正切(tanδ) | — | 2 × 10^{-4} | 50 Hz 或 1 kHz,23 °C |