产品介绍
双向拉伸聚酯(BOPET)普通膜,热稳定性好、韧性强、气密及水密性佳,适用于真空镀铝、复合包装及蒸煮袋制造。油墨及涂层附着力好,支持多色印刷,常用于速冻食品、工业品及化妆品包装的热封袋。
产品要点
- 幅宽 200-1200mm
- 油墨与涂层附着力良好
- 可做 OEM 定制印刷
技术参数
薄膜项目 | BOPET | 日期 | 数量 | 2,841 吨 | |||||
卷号 | B--07121704 | 检测日期 | 温度/湿度 测试条件 | 23℃/50RH | |||||
判定标准 | 《聚酯薄膜试验方法》,厚度 14 μm | ||||||||
序号 | 项目 | 单位 | 平均 | 标准偏差 | 备注 | ||||
1 | 平均厚度/厚度公差 | ΜM | 14.2 | 0.17 | 平均厚度公差:+1.7% | ||||
% | 最小:-1.9 | 最大:+1.9 | |||||||
2 | 拉伸强度 | 纵向(MD) | Mpa | 235 | 10 | ||||
横向(TD) | 268 | 35 | |||||||
3 | 伸长率 | 纵向(MD) | % | 130 | 13 | ||||
横向(TD) | 113 | 12 | |||||||
4 | 热收缩率 | 纵向(MD) | % | 1.7 | 0.2 | 温度:150 °C 时间:30 min | |||
横向(TD) | -0.1 | 0.1 | |||||||
5 | 雾度 | % | 2.3 | 0.1 | |||||
6 | 1.2 光亮 | 45° | |||||||
7 | COF | ΜS | 1.41 | 0.03 | 对面:膜/膜 | ||||
ΜK | 1.38 | 0.01 | |||||||
ΜS | 同面:膜/膜 | ||||||||
ΜK | |||||||||
8 | 模量 | 纵向(MD) | M Pa | 4474 | 122 | ||||
横向(TD) | 4914 | 308 | |||||||
9 | 润湿张力 | M N/M | 58 | ||||||
10 | 热封强度 | N/15mm | 1 bar/130 °C/1 s | ||||||
11 | 相对介电常数(50 Hz) | ||||||||
12 | 介质损耗角正切(50 Hz) | Pp M | |||||||
13 | 电气强度 | V/ΜM | |||||||
14 | 体积电阻率 | ΩCm | |||||||
典型值——具体公差以报价单为准。
供应与出口
BOPET 普通膜 在 AEC GROUP 体系内生产与分切,可按幅宽与纸芯规格供应大卷、分切卷或片材,配出口包装、原产地证及进口商所需单证。告诉我们用途、厚度与年用量,我们会确认牌号、起订量与交期。
English original / 英文原文
Product description
Bopet Plain Film is a biaxially oriented polyester (BOPET) packaging film manufactured by AEC GROUP (Anhui Eastern Communication Imp. & Exp. Co., Ltd.), a packaging film manufacturer, supplier and exporter based in Hefei, China. Package, cooking bag manufacture, etc. Biaxially-oriented polyester (BOPET) plain film with good thermal stability, tenacity and low air/water permeability, suitable for vacuum aluminium plating, composite packaging and cooking-bag manufacture. Available in 12-25 / 75-150 / 185-380 / 500 μm thickness.
Key Features
- Width 200-1200mm
- Good ink & coating adhesion
- Custom OEM printing available
- Excellent tensile strength and dimensional stability
- High temperature resistance
- Good chemical resistance
Applications
- Composite packaging
- Cooking-bag manufacture
- Heat-sealed bags in frozen food
- Industrial goods
- Cosmetics packaging
Product Details
BOPET PLAIN FILM
BOPET film (biaxially oriented Polyester films) features good thermal stability and tenacity; low air and water permeability; applicable to vacuum aluminum plating, compound package, cooking bag manufacture, etc.
Biaxially-oriented polyester (BOPET) plain film with good thermal stability, tenacity and low air/water permeability, suitable for vacuum aluminium plating, composite packaging and cooking-bag manufacture. Good ink and coating adhesion supports multi-colour printing, and it's commonly used for heat-sealed bags in frozen food, industrial goods and cosmetics packaging.
Featuring :
Having the good adhesion with ink and coating, can be used for multi-color printings with good flatness. Is mainly used in heat-sealing bags of frozen food, industrial products and cosmetics packaging.
Specification:
thickness: 12 microns-25 microns, 75 microns-150 microns ,185 microns-380 microns, 500 microns
width :200-1200MM
length : 500m ,1000m ,1500m,4000m,6000m,9000m,12000m
Polyester film is wound around paper shaft with an internal diameter of 76.2mm-152.4mm and covered with polyethylene film; each coil is supported by damper and put in carton; medium and large package needs wooden mount.
Customer's own requirement is available for us such as printed OEM logos and private label or particular size and package style.
As a professional packaging film manufacturer in China, AEC GROUP supplies Bopet Plain Film for composite packaging. Custom sizes and specifications are available on request. Contact our team for pricing, samples and technical support.
Technical data
Film Item | BOPET | Date | Quantity | 2,841tons | |||||
Roll NO. | B--07121704 | Test Date | Temperature/Humidity Condition | 23℃/50RH | |||||
Test Criterion | 《Polyester testing method》Thickness :14um | ||||||||
No. | Item | Unit | Average | Standard Deviation | Remarks | ||||
1 | Average Thickness/Thickness Tolerance | ΜM | 14.2 | 0.17 | Average Thickness Tolerance: +1.7% | ||||
% | Min.: -1.9 | Max:+1.9 | |||||||
2 | Tensile Strength | MD | Mpa | 235 | 10 | ||||
TD | 268 | 35 | |||||||
3 | Elongation | MD | % | 130 | 13 | ||||
TD | 113 | 12 | |||||||
4 | Heat Shrinkage | MD | % | 1.7 | 0.2 | Temperature:150℃ Time:30min | |||
TD | -0.1 | 0.1 | |||||||
5 | Haze | % | 2.3 | 0.1 | |||||
6 | 1.2 Glossy | 45° | |||||||
7 | COF | ΜS | 1.41 | 0.03 | Opposite Surface :F/F | ||||
ΜK | 1.38 | 0.01 | |||||||
ΜS | Same Surface :F/F | ||||||||
ΜK | |||||||||
8 | Modul | MD | M Pa | 4474 | 122 | ||||
TD | 4914 | 308 | |||||||
9 | Humid Tension | M N/M | 58 | ||||||
10 | Hot-Sealing Strength | N/15mm | 1bar/130℃/1s | ||||||
11 | Relative Dielectric Constant(50Hz) | ||||||||
12 | Dielectric Dissipation Factor(50Hz) | Pp M | |||||||
13 | Dielectric Strength | V/ΜM | |||||||
14 | Volume Resistivity | ΩCm | |||||||