Technical data
Film specifications
Key parameters for our main grades — thickness, tensile strength, haze, gloss, surface tension and width. Values are typical and can be tailored to your line.
BOPP / BOPP Plain Film Technical Data
General Information
- Standard
- QB/T 2713-2005
- HS Code
- 3920201000
- Type
- BOPP Plain 20µm
- Roll No.
- BP230815001
- Material
- PP K8303 / K7726
- Produce Date
- 2023-08-15
- Test Date
- 2023-08-18
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Parameter · | Unit | Value / Range | Standard |
|---|---|---|---|
| Thickness · | μm | 3 – 75 | GB/T 13950 |
| Tensile Strength MD · | N/15mm | ≥ 10 | GB/T 1040 |
| Tensile Strength TD · | N/15mm | ≥ 8 | GB/T 1040 |
| Elongation at Break MD | % | 50 – 200 | GB/T 1040 |
| Haze · | % | ≤ 1.5 | GB/T 2410 |
| Gloss (45°) · | GU | ≥ 85 | GB/T 8807 |
| Surface Tension · | mN/m | ≥ 38 | GB/T 14216 |
| Width Range · | mm | 250 – 10,000 | Custom |
| Core Diameter · | inch | 1″ 2″ 3″ 6″ | Standard |
| Roll Length · | m | 200 – 8,000 | Custom |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
BOPP / BOPP Heat Seal Film Technical Data
General Information
- Standard
- QB/T 2713-2005
- HS Code
- 3920201000
- Type
- BOPP Heat Seal 25µm
- Roll No.
- HS230901002
- Material
- PP K8303 + Seal Layer
- Produce Date
- 2023-09-01
- Test Date
- 2023-09-05
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Parameter · | Unit | Value | Notes |
|---|---|---|---|
| Thickness · | μm | 15 – 40 | Typical range |
| Heat Seal Temperature · | °C | 100 – 140 | Grade dependent |
| Heat Seal Strength · | N/15mm | ≥ 3 | 120°C 0.3MPa 1s |
| Coefficient of Friction | – | 0.1 – 0.3 | Film to film |
| Haze · | % | ≤ 2.5 | GB/T 2410 |
| MVTR · | g/m²·24h | ≤ 4 | 38°C 90% RH |
| Sealing Config · | – | One/Two-side | As specified |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
BOPP / BOPP Pearlized Film Technical Data
General Information
- Standard
- QB/T 2713-2005
- HS Code
- 3920201000
- Type
- BOPP Pearlized 35µm
- Roll No.
- PL231010003
- Material
- PP K8303 + Calcium Carbonate
- Produce Date
- 2023-10-10
- Test Date
- 2023-10-13
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Parameter · | Unit | Value | Notes |
|---|---|---|---|
| Thickness · | μm | 20 – 50 | Standard range |
| Density · | g/cm³ | 0.55 – 0.75 | Lower than clear BOPP |
| Opacity · | % | ≥ 75 | White opaque |
| Gloss (45°) · | GU | 60 – 110 | Pearl luster |
| Corona Treatment | – | One side | ≥ 38 mN/m |
| Heat Seal · | – | Both sides | Heat sealable |
| Surface Resistance · | Ω | ≤ 10¹¹ | Antistatic |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
BOPET / BOPET Clear Film Technical Data
General Information
- Standard
- GB/T 16958-2013
- HS Code
- 3920629000
- Type
- BOPET Clear 12µm
- Roll No.
- PE231120004
- Material
- PET Chip Wankai 8008
- Produce Date
- 2023-11-20
- Test Date
- 2023-11-23
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Parameter · | Unit | Value / Range | Standard |
|---|---|---|---|
| Thickness · | μm | 4.5 – 350 | GB/T 16958 |
| Tensile Strength MD | MPa | ≥ 150 | GB/T 1040 |
| Tensile Strength TD | MPa | ≥ 150 | GB/T 1040 |
| Haze · | % | ≤ 3 | GB/T 2410 |
| Light Transmittance · | % | ≥ 87 | GB/T 2410 |
| Thermal Shrinkage MD (150°C) | % | ≤ 1.5 | GB/T 12027 |
| O₂ Transmission Rate | cm³/m²·24h·atm | 50 – 150 | Unfilled grade |
| Width Range · | mm | 250 – 5,000 | Custom |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
CPP / CPP Cast Film Technical Data
General Information
- Standard
- GB/T 10003-2008
- HS Code
- 3920209000
- Type
- CPP 40µm
- Roll No.
- CP231201005
- Material
- PP F401 / T30S
- Produce Date
- 2023-12-01
- Test Date
- 2023-12-04
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Parameter · | Unit | Value / Range | Notes |
|---|---|---|---|
| Thickness · | μm | 20 – 80 | Standard grades |
| Tensile Strength MD | N/15mm | ≥ 20 | GB/T 1040 |
| Heat Seal Temperature | °C | 120 – 160 | Grade dependent |
| MVTR · | g/m²·24h | ≤ 8 | 38°C 90% RH |
| Haze · | % | ≤ 5 | GB/T 2410 |
| Retort Grade · | – | Available · | 121°C retort |
| Width Range · | mm | 200 – 6,000 | Custom |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
POF / POF Polyolefin Shrink Film Technical Data
General Information
- Standard
- GB/T 28118-2011
- HS Code
- 3920999090
- Type
- POF Shrink Film 19µm
- Roll No.
- PF230715006
- Material
- PE + PP
- Produce Date
- 2023-07-15
- Test Date
- 2023-07-18
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Test Item | Unit | ASTM / ASTM Test | 12µm ( ) | 15µm ( ) | 19µm ( ) | 25µm ( ) |
|---|---|---|---|---|---|---|
| TENSILE | ||||||
| Tensile Strength (MD) | N/mm^2 | D882 | 115 | 110 | 110 | 95 |
| Tensile Strength (TD) | N/mm^2 | D882 | 110 | 105 | 105 | 90 |
| Elongation (MD) | % | D882 | 115 | 120 | 125 | 130 |
| Elongation (TD) | % | D882 | 110 | 115 | 115 | 125 |
| TEAR | ||||||
| MD at 400gm | gf | D1922 | 10.5 | 14.5 | 17.5 | 23.5 |
| TD at 400gm | gf | D1922 | 10.0 | 13.5 | 16.0 | 23.0 |
| SEAL STRENGTH | ||||||
| MDHot Wire Seal | N/mm | F88 | 0.65 | 0.81 | 1.03 | 1.25 |
| TDHot Wire Seal | N/mm | F88 | 0.68 | 0.86 | 1.06 | 1.30 |
| COF (Film To Film) | ||||||
| Static | – | D1894 | 0.25 | 0.22 | 0.22 | 0.25 |
| Dynamic | – | D1894 | 0.24 | 0.20 | 0.24 | 0.26 |
| OPTICS | ||||||
| Haze | % | D1003 | 2.2 | 2.6 | 3.2 | 3.9 |
| Clarity | % | D1746 | 98.5 | 98.0 | 97.0 | 95.0 |
| Gloss @ 45Deg | % | D2457 | 85.5 | 87.0 | 83.5 | 81.5 |
| BARRIER | ||||||
| Oxygen Transmission Rate | cc/m²/day | D3985 | 11300 | 10800 | 7200 | 5400 |
| Water Vapor Transmission Rate | gm/m²/day | F1249 | 45.5 | 38.5 | 26.5 | 22.5 |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
Certificate of Technical Analysis
General Information
- Standard
- QB/100
- Code
- 39206290000
- Type
- PET 4.5µm (Glossy PET4.5)
- Roll No.
- 20180910ABC-1
- Material
- MD642
- Produce Date
- 2018-09-10
- Test Date
- 2018-09-18
- Test Environment
- (T): 30 ℃ / (R): 56 %
| Item | Unit | Ave. | Standard Tolerance | Remark |
|---|---|---|---|---|
| Thickness | ||||
| Thickness Ave. | µm | 4.50 | 0.05 | |
| Tolerance | % | -0.2 | – | |
| Tensile Strength | ||||
| (MD) | MPa | 230.8 | 7.0 | |
| (TD) | MPa | 267.4 | 6.1 | |
| Elongation at Break | ||||
| (MD) | % | 112.3 | 8.1 | |
| (TD) | % | 91.7 | 5.5 | |
| Thermal Shrinkage | ||||
| (MD) | % | 1.62 | 0.18 | |
| (TD) | % | 0.40 | 0.10 | |
| Roughness (Ra) | µm | 0.101 | 0.009 | |
| Friction Modulus | ||||
| Static | – | 0.46 | 0.04 | |
| Motive (Dynamic) | – | 0.41 | 0.02 | |
| Dielectric Strength | ||||
| DC E_b | V/mum | 542 | 47 | (Min): 430 |
This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
BOPP / BOPP Thermal Laminating Film Technical Data
General Information
- Standard
- QB/T 4658-2014
- HS Code
- 3920201000
- Type
- BOPP Thermal Laminating 25µm (Glossy/Matte)
- Roll No.
- TL240110007
- Material
- BOPP + EVA Hot Melt Adhesive
- Produce Date
- 2024-01-10
- Test Date
- 2024-01-13
- Test Environment
- (T): 23 ℃ / (RH): 50 %
| Item | Unit | Method | / (Standard / Typical Values) |
|---|---|---|---|
| BOPP / BOPP Thickness | µm | GB/T6672 | |
| Adhesive Thickness | µm | GB/T6672 | 12 | 11 | 08 | 08 |
| Average Thickness Tolerance | % | GB/T6672 | ±8 |
| Yield | m²/kg | – | 37.2 | 49.3 | 51.0 | 52.6 |
| Bond Strength (180°) | N/15mm | – | ≥ 0.6 |
| Tensile Strength | MPa | GB13022 | (MD) ≥ 70 / (TD) ≥ 130 |
| Elongation at Breakage | % | GB13022 | (MD) ≤ 200 / (TD) ≤ 60 |
| Wetting Tension | mN/m | GB/T10003 | |
| Heat Shrinkage | % | GB/T10003 | (MD) ≤ 1.5 / (TD) ≤ 1.0 |
| Haze | % | GB2410 | < 5 |
Disclaimer: (All details of the above information present the best condition available to us, and we believe them to be reliable, which can not be taken for guaranteed. We suggest that the suitability is determined by the really requirements of buyers.)